Battery
Parts
Wire
Zenith
PRODUCT CATEGORIES
BASE
GAMMA MATCH
MOBILE
MOUNTS
PARTS
ROTOR
SPRINGS
SWITCH BOX
TELEVISION
HORNS SIREN
P A AMPLIFIER
TRANSFORMER
CONNECTOR
PARTS
POWER CORD
RADIO MOUNTS
SWITCH BOXS
SWR/WATT METER
CO-PHASE HARNESS
RG213U
RG8S
RG8U
RG8X
ACCESSORIES
BASE
MIC HOOKS
MOBILE
PLUG
Cables
METERS
Relay
TUBES
Toggle Switches
|
PBM-120 P A AMPLIFIER
PBM-120 - 120W Contractor Series PA Amplifier Our contractor series three channel mixer/amplifier is a 120 watt amplifier. It features an auto mute function, music on hold output with separate level control (600 ohm line and one watt 8 ohm), 600 ohm telephone line input with level control, bass and treble tone controls, front panel level controls, and manual muting contacts.
In addition to the telephone line input, this unit accepts inputs from three sound sources. Each source can utilize a choice of microphone inputs (terminal strip) or auto summing stereo auxiliary RCA inputs. Mic 1 also contains an input for an XLR connector.
Outputs include a choice of 4, 8, and 16 ohm as well as 70 and 25 volt line outputs. There is an auxillary output connection as well.
Technical Specifications Power Supply 120VAC, 50/60 Hz. Rated Output Power 120 W RMS Frequency Response 50 Hz. - 15,000 Hz. /- 3 dB Total Harmonic Distortion 1% or less at 1 kHz. Input Sensitivity/Impedance Tel: 100mv/600 ohms, balanced Mic- 1-3:1.0mV/600 ohms, balanced Aux- 1-3: 200mV/50,000 ohms, unbalanced S/N Ratio Mic- 1-3: Better than 55 dB Aux- 1-3: Better than 70 dB Tel: Better than 60 dB Speaker Outputs 4 ohms, 8 ohms, 16 ohms, 25/70V line Music on Hold 600 ohm line/1 Volt 8 ohm/1 Watt Mute Level Aux 1-3/Mic 2
Your Price: $456.24
ID #: 000000000PBM-120
|
Your Price: $456.24
ID #: 000000000PBM-120
|
|