Battery
Parts
Wire
Zenith
PRODUCT CATEGORIES
BASE
GAMMA MATCH
MOBILE
MOUNTS
PARTS
ROTOR
SPRINGS
SWITCH BOX
TELEVISION
HORNS SIREN
P A AMPLIFIER
TRANSFORMER
CONNECTOR
PARTS
POWER CORD
RADIO MOUNTS
SWITCH BOXS
SWR/WATT METER
CO-PHASE HARNESS
RG213U
RG8S
RG8U
RG8X
ACCESSORIES
BASE
MIC HOOKS
MOBILE
PLUG
Cables
METERS
Relay
TUBES
Toggle Switches
|
FS4B 4' BLACK FIRESTIK ANTENNA
Firestik�II 40 Channel +, Tunable Tip CB Antenna
MODEL FS4-4 FT 5/8 WAVE RATED @ 900 watts
BRIEF Easy-tune 'bare-hands tunable tip', High-performance coil design, Rugged solid-fiberglass core, High power handling
DETAIL If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features.
The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers.
All "FS" series antennas are factory bench tested for resonant frequency and overall quality.
ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle.
Your Price: $15.53
ID #: 000000000000FS4B
|
Your Price: $15.53
ID #: 000000000000FS4B
|
|